CATEGORIES
Are you interested in more information about this product or service? If so, please fill out the form below and representative will contact you.
Motor-driven MDS-508-500/509-500 separates v-scored PCBs without stress to boards, components or solder joints. it is suited for medium to high-volume production, Cut length is fully programmable; programmed length is displayed on an LED readout.
MDS-508-500/509-500 Motorized PCB Separator Feature
● With completely independent development and controlled by micro-computer process, the machine is very accurate and stable. It can cut a single board within the length from 0 to500mm off with a cut. |
● The feeding speed is adjustable with 500mm/s and 300mm/s. If the speed is fast enough, the quality is improved for the board is cut without burrs and rough selvedge. |
● The feed distance of the knife wheel is from 0 to 500mm(the tool length can be customized). The height of the knife wheel is fine-tuning from 0 to 2mm, so that it is suitable for PCB of various kinds of thickness and the depth of V-CUT groove. The height of work station is regulable from 0 to 50mm. |
● The forward and stop point can be set according to the plate length when feeding, the stop point for manual setting. |
● The tailgate depth range: unlimited. The largest plate cutting width: unlimited, the maximum cutting length: 500mm, the plate thickness: 0.25-3.5mm. The thickness between V groove: 0.25-2.0mm. |
● The upper and lower knives is made of imported high-speed steel material, which are durable and can be regrinded. be adjusted precisely. |
● The machine can be in supporting use of a complete set of conveyor belt, which is convenient for the cut PCB to be send out automatically. |
● The platform is adjustable. It is good for the product quality when lifting the platform, because it will reduce stress and will not hurt the product. |
● The spacing device applies to products of different size, so as to improve the work efficiency. |
Motorized PCB Separator MDS-508,509 Specification | ||
Model | MDS-508(no conveyor) | MDS-509(with conveyor) |
PCB Thickness | 0.6 mm to 3.5 mm | 0.6mm to 3.5mm |
Suitable Material | FR4,PCB | FR4,PCB |
V-cut thickness | Max 2.0mm | Max 2.0mm |
Maximum Depaneling Length | 350mm | 350 mm |
Depaneling Mode | Motorized | Motorized |
Start mode | Foot Switch | Foot Switch |
Minimum component distance from v-groove | 2.5mm | 2.5mm |
Separating Speed | Adjustable | Adjustable |
Top component height | Max:30 mm | Max:30mm |
Bottom component height | Max:15mm | Max:12mm |
Power Supply | 220V,50HZ | 220V,50HZ |
Power | 60W | 60W |
Machine Size | L620xW400xH430mm | L1090xW400xH430mm |
Machine Net Weight | 45 kg | 56kg |
Optional configuration:
◎ Circular blade and linear blade * 1set
ILIKELEO
Leopeng_keentec
sales@1clicksmt.com