CATEGORIES
Are you interested in more information about this product or service? If so, please fill out the form below and representative will contact you.
More info at www.1clicksmt-pcbhandling.com 
Loaders, unloaders, buffer stocker and conveyors for SMT assembly producton.
A large stack of unpopulated PCB's
is placed above the ESD beltconveyor.
Unique separation cams take one PCB from
the bottom of the stack and lowers it onto
the ESD belt conveyor.
DetailsA large stack of unpopulated PCB's
is placed above the ESD beltconveyor.
Unique separation cams take one PCB from
the bottom of the stack and lowers it onto
the ESD belt conveyor.
The unit loads your production line
automatically and It is equipped with two
PCB loading modes and especially suitable
for single-line mode which processes
double-sided pcbs.
DetailsThe unit loads your production line
automatically and It is equipped with two
PCB loading modes and especially suitable
for single-line mode which processes
double-sided pcbs.
The unit is designed for automatic
loading of unpopulated PCB's onto the
line using suction cups.The top PCB is lifted
from stack and lowered onto belt segment.
DetailsThe unit is designed for automatic
loading of unpopulated PCB's onto the
line using suction cups.The top PCB is lifted
from stack and lowered onto belt segment.
The unit provides automatic magazine
change-over for continuous AOI/SPI
system loading and unloading.
Boards out/in at the same side of
AOI/SPI, and board is sent out
from magazine to AOI/SPIsystem and
back to same slot after inspection.
DetailsThe unit provides automatic magazine
change-over for continuous AOI/SPI
system loading and unloading.
Boards out/in at the same side of
AOI/SPI, and board is sent out
from magazine to AOI/SPIsystem and
back to same slot after inspection.
_副本.jpg)
The PCB's are collected from
upstream machine using attached
conveyor and pushed into the magazine.
DetailsThe PCB's are collected from
upstream machine using attached
conveyor and pushed into the magazine.
The unit provides automatic magazine
change-over for continuous line unloading.
PCB's are collected from an upstream pusher
conveyor and pushed into the magazine.
Full magazines are offl oaded at an
ergonomic low level.
DetailsThe unit provides automatic magazine
change-over for continuous line unloading.
PCB's are collected from an upstream pusher
conveyor and pushed into the magazine.
Full magazines are offl oaded at an
ergonomic low level.
The PCB's are collected from upstream
machine onto a shuttle conveyor and pushed
into designated magazine.Shuttle conveyor
moves sideways between upstream
machine and magazines.
DetailsThe PCB's are collected from upstream
machine onto a shuttle conveyor and pushed
into designated magazine.Shuttle conveyor
moves sideways between upstream
machine and magazines.
The single magazine buffer
can be used as a mid-line loader or unloader,
as a LIFO buffer or as a reject buffer.
DetailsThe single magazine buffer
can be used as a mid-line loader or unloader,
as a LIFO buffer or as a reject buffer.
This unit allows buffering of PCB's in LIFO mode.
It uses belt segments to hold the PCB over its
complete lenght. When adding or extracting
a PCB to/from the buffer a drive mechanism
engages with the belt segment to
smoothl transfer the PCB in- or out.
DetailsThis unit allows buffering of PCB's in LIFO mode.
It uses belt segments to hold the PCB over its
complete lenght. When adding or extracting
a PCB to/from the buffer a drive mechanism
engages with the belt segment to
smoothl transfer the PCB in- or out.
TThis unit allows buffering of PCB's
in FIFO ,LIFO, Pass-through- mode. It uses belt segments
to hold the PCB over its complete lenght. When adding
or extracting a PCB to/from the buffer a drive mechanism
engages with the belt segment to smoothly
transfer the PCB in- or out.
DetailsTThis unit allows buffering of PCB's
in FIFO ,LIFO, Pass-through- mode. It uses belt segments
to hold the PCB over its complete lenght. When adding
or extracting a PCB to/from the buffer a drive mechanism
engages with the belt segment to smoothly
transfer the PCB in- or out.
The NG OK vertical buffer is designed to
buffer NG and OK board after inspection
machine (AOI / SPI) and pass a OK board
to next process.NG board will go to the
upper conveyor for visual check.
DetailsThe NG OK vertical buffer is designed to
buffer NG and OK board after inspection
machine (AOI / SPI) and pass a OK board
to next process.NG board will go to the
upper conveyor for visual check.
The turn conveyor is designed to change
the flow direction of a PCB assembly line.
The PCB is transferred onto the built-in
ESD belt conveyor, which turns either
clockwise or counter-clockwise.
Details
The turn conveyor is designed to change
the flow direction of a PCB assembly line.
The PCB is transferred onto the built-in
ESD belt conveyor, which turns either
clockwise or counter-clockwise.
ILIKELEO
Leopeng_keentec
sales@1clicksmt.com